It is a very useful machinery for pharmaceutical industry where in gentle blending of dry granules or powder is to be done.
It consists of octagon shaped body, rectangular central portion and top and bottom polygonal frustum.
It is provided with baffles for fast and efficient mixing, charging port and outlet with butterfly valve.
The entire until is mounted on a sturdy stand, complete with electric motor and gear box. It can be supplied with bin charging system and can be designed for vacuum for dust free charging & discharging of product (Optional). The machine is provided with control panel board and safety railing.

Salient Features :
It is a slow speed blender and has a removable baffle mounted through a rectangular openable lid.
Easy for cleaning in place.
The power consumption is comparatively lower than the other similar type of blenders. Capacity available 100 ltrs. To 5000 ltrs. & 3 to 5 ltrs for R & D models.
Contact parts in limit switch is provided for operator's safety & manual intching arrangement.
Flame- proof motors with flame- proof push button stations can be provided (optional).


Technical Specifications :

Note: Small Capacities Modules from 5 Kgs to 100Kgs are also available

The double cone blender is an efficient and versatile machine to mixing dry powder and granules homogeneously & widely used for pharmaceutical, food, chemical and cosmetic products etc. It consists of a cylindrical shell with two conical frustums provided with opening for charging and discharging. Butterfly valve is provided for discharge. The vessel is mounted on a sturdy stand with bearing blocks & driven through a gear box coupled with motor. The machine is provided with control panel board and safety railing. All jointa argon are welded , ground and polished to mirror finish from inside and malt finish from outside.

Technical Specifications :

Ribbon blender is used for uniform and homogeneous mixing of powder, granules etc. It consists of a 'U' shaft with two sets of spiral ribbons; one inside the other. The complete assembly is mounted on a MS/ SS structure. The inner and outer ribbons are so arranged that during rotation, the materif reaches each and every corner of the trough and imparts radial and linear motion to the whole of the material to be mixed. At the same time material is moved from side of the trough to the centre and vise versa resulting in quick & homogeneous mixing. Double ribbon configuration also brings materials towards central bottom outlet while discharging. A specially designed valve is provided at the center or butterfly valve for discharge. Blending is achieved in semi fluidized state in the upper zone of the trough when used for finee powders. Machine can be provided with spray nozzles with pressure spraying system for spraying additives in blenders. Ribbon blender can also be used as dryer by providing jacket on the trough.

Technical specification :

Mass mixer is used for mixing dry or dump materials and used for tablet granulation. It consists of a 'U' shaped trough, discharge valve, solid SS end plates, SS shaft with specially designed paddles. The shaft is coupled with heavy duty gear box & motor. The shaft is supported on heavy duty bearing blocks at both the ends and provided with teflon seals & stuffing box.

Top cover is provided with acrylic sheet for easy visibility during mixing operation. The motor- gear box assembly is completely covered in enclosure control panel box is provided with the machine with reverse and forward switch for the shaft. MS parts are epoxy painted or cladded with SS sheet for GMP model. All SS parts are polished to mirror finish from inside and outside parts are malt finished.

Salient Features :
Standard and GMP model with contact parts in SS 304/ SS 316 quality.
Specially designed flush type outlet valve or butterfly valve (optional).
Top cover with acrylic sheet. The cover is connected to limit switch for the safety purpose. Machine automatically stops as soon as the cover is opened during the operation for the safety of operator.
Shaft sealing at inside and out side with teflon bush and SS stuffing box at outside.
Solid stainless steel end covers and frame work on the trough in even standard models for long troublefree life of the machine.

Technical Specifications :

Capacity : 50Ltrs. to 15000 Ltrs.
Material of Construction : Stainless Steel 304/SS316L quality.
MS/SS Jackaet or limpet coil for steam heating / cooling.
Reaction Vessel van be provided with different types of Agitator like Anchor type / Propeller type / Paddle type Pitched blade turbine type of with high speed homogenizer.
Shaft entry sealed by Oil seal / Plain or Water cooled Stuffing Box / Single or Double Mechanical seal.
High density glasswool insulation & S.S. Cladding can be done on demand.